Furniture Hardware Stamping Solutions

LIHAO provides furniture hardware stamping solutions for manufacturers producing drawer slides, hinges, brackets, mounting plates, metal rails and other furniture fittings in high-volume production.

Our solutions combine decoiling, straightening, servo feeding, stamping and die systems into a stable production line. According to part shape, strip width, material thickness, feed pitch and required output, LIHAO can configure the equipment around the actual furniture hardware production process.

Typical Furniture Hardware Parts

LIHAO stamping equipment can be used for the production of:

● Drawer slides
● Cabinet hinges
● Furniture brackets
● Mounting plates
● Metal rails
● Shelf supports
● Furniture connectors
● Locking plates
● Guide rails
● Other stamped furniture fittings

Furniture hardware often requires repeated punching, slotting, bending and forming along a long metal strip. Stable feeding and accurate pitch control are therefore important for maintaining consistent hole positions and dimensions.

Common Materials for Furniture Hardware Stamping

Typical materials include:

● Cold rolled steel
● Galvanized steel
● Stainless steel
● Carbon steel
● Aluminum strip

The suitable straightener and feeder should be selected according to material thickness, width, hardness and coil weight.

For long production runs, consistent material flatness and feeding accuracy help reduce die adjustment and maintain stable finished-part quality.

Key Challenges in Furniture Hardware Stamping

Accurate Hole Positioning

Drawer slides, rails and mounting hardware often contain multiple holes, slots and formed sections.

Small feeding errors can accumulate during progressive stamping and affect hole position, assembly accuracy and final product fit.

An NC servo feeder provides adjustable feed length and repeatable material positioning for continuous stamping.

Long Strip and Multi-Stage Forming

Many furniture hardware components are produced through several punching and forming stages.

The feeding system must maintain a stable rhythm as the strip moves through the progressive die.

This is especially important for:

● Drawer slide components
● Cabinet rail parts
● Long mounting strips
● Multi-hole brackets
● Repeated forming operations

High-Volume Production

Furniture hardware is usually produced in large batches, so production efficiency and downtime directly affect unit cost.

Automated coil feeding reduces manual material handling and supports longer continuous production cycles.

Material Flatness

Coil curvature can affect feeding stability and die positioning.

A properly selected straightener helps prepare the strip before it enters the press, improving consistency during punching and forming.

Recommended Furniture Hardware Stamping Line

A typical furniture hardware stamping line can be configured as:

Coil → Decoiler → Straightener → NC Servo Feeder → Stamping Press → Progressive Die → Finished Parts

For customers requiring a more compact production layout:

Coil → 3 in 1 Decoiler Straightener Feeder → Press → Progressive Die → Finished Parts

The final configuration depends on material size, part geometry and production speed.

Equipment for Furniture Hardware Stamping

NC Servo Roll Feeder

The NC servo roll feeder is suitable for furniture hardware requiring different feed lengths and stable repeat positioning.

It can be used for progressive stamping of brackets, rails, drawer slide parts and other repetitive metal components.

3 in 1 Decoiler Straightener Feeder

The 3 in 1 decoiler straightener feeder integrates decoiling, straightening and feeding into one system.

It is suitable for manufacturers looking to:

● Reduce line footprint
● Improve material handling efficiency
● Minimize manual adjustment
● Maintain stable coil feeding
● Simplify line integration

Decoiler and Straightener

Separate decoilers and straighteners are suitable when customers need more flexible production-line layouts or handle different coil specifications.

Equipment selection can be based on:

● Coil width
● Coil weight
● Material thickness
● Material hardness
● Required straightening performance

Stamping Press and Progressive Die

The press and die should be selected according to part dimensions, forming stages, required tonnage and production speed.

For high-volume furniture hardware, a progressive die can combine punching, slotting, bending and forming in one continuous process.

Drawer Slide Stamping Solutions

Drawer slide production is one of the most typical applications in furniture hardware stamping.

These parts usually require:

● Long and narrow strip feeding
● Repeated hole punching
● Accurate slot positioning
● Multi-stage forming
● Stable high-speed production

LIHAO can configure a drawer slide stamping line with a decoiler, straightener, servo feeder, press and progressive die according to the required rail profile and production capacity.

For customers producing different slide sizes, the feeding system can also be selected with production flexibility in mind.

Customized Furniture Hardware Stamping Solutions

There is no single machine configuration suitable for every furniture component.

Before recommending equipment, LIHAO can evaluate:

● Part drawing
● Material type
● Material thickness
● Coil width
● Coil weight
● Feed pitch
● Required output
● Press tonnage
● Die structure
● Factory layout

Based on these parameters, we can recommend an individual feeder or a complete furniture hardware stamping production line.

Why Choose LIHAO?

LIHAO focuses on stamping automation equipment and integrated press feeding systems.

For furniture hardware manufacturers, we can support:

● Coil handling equipment
● Material straightening
● Servo feeding
● Press matching
● Progressive die integration
● Production line layout
● Installation and commissioning
● Operator training
● Spare parts and after-sales support

By matching the feeder, press and die around the same production requirement, the complete line can achieve better compatibility than separately selected equipment.

Build Your Furniture Hardware Stamping Line

Whether you produce drawer slides, hinges, brackets, rails or other furniture fittings, LIHAO can configure a stamping solution based on your actual part and material specifications.

Send us your part drawing, material thickness, coil width, feed pitch and required production capacity. We can recommend a suitable furniture hardware stamping solution, from an individual servo feeder to a complete automated production line.