-
Application of automatic feeder cutting plate stamping production line.
Jul. 15, 2020
Automatic production line is mainly used for cutting plate machine, the shear will roll under shear of material into flake board, its by uncoiling, leveling, feeding, shearing, conveying, buttress material six processes.
-
Common mould problems and maintenance methods
Jul. 13, 2020
The cutting edge caused by various reasons will have a certain influence on the quality of the workpiece.It is one of the most common repair contents in mold repair.
-
Heavy material rack common problem handling.
Jul. 11, 2020
Heavy material frame is applicable to a wide range, from tens of kilograms of light material coil to the weight of more than ten tons of super large material coil can bear.
-
How to eliminate the operation error of automatic feeder
Jul. 10, 2020
NC servo series automatic feeder is now the most recommended feeder among all kinds of punch feeder equipment.
-
Operation flow and parameter setting method of left and right skew feeder.
Jul. 08, 2020
Aiming at the blanking processing and production of circular sheet, Lihao machinery has developed a high-quality biased feeder suitable for stamping forging processing with different material thickness and feeding step length.
-
Introduction of planar electronic feeder.
Jul. 06, 2020
Plane electronic feeder is also called disc feeder, plane material carrier and disc material carrier. It is a horizontal material carrier.
-
Introduction of automatic air feeder.
Jul. 04, 2020
The air automatic feeder is one of the earliest feeding equipment used in stamping industry. Its principle is to use air source as power, to clamp materials through the cylinder, to feed by the telescopic stroke of the cylinder, and to adjust the feeding length by the length of the stroke of the adjusting cylinder to control.
-
How do I install a three-in-one servo feeder.
Jul. 02, 2020
The three-in-one feeder includes the material rack, trolley and the material leveling part. The installation shall be carried out in accordance with the operation rules.
-
How to achieve automated production of punch.
Jun. 20, 2020
With the increased awareness of automated production, many companies have adopted automated production lines for production to improve production efficiency and create benefits.
