With the popularization of automation equipment.Now more and more stamping press manufacturers use automatic production lines for stamping production, because the automatic production lines can reduce the manpower required in each process.Reduce labor costs.Improve productivity.Improve the quality of production products, but at present, most of the stamping production lines in the market are composed of three independent types: material rack, leveller and feeder, which occupy a large space in the workshop, and the degree of automation is not high. At the same time, due to the composition of multiple equipment, the material transmission will be unstable and other problems.In the process of transmission, there will be weak vibration and inaccurate transmission, the degree of synchronization is not high enough, the equipment structure is complex, the operation is tedious, and the cost of purchase and later maintenance is high.
Here to recommend a three-in-one flat feeder to customers, the three-in-one feeder is not only economical, saving space.Save manpower.It is composed of material frame and leveling machine + roller feeding machine + punch press, the production line covers a small area, higher automation, easier operation.The three-in-one feeder is composed of two main structures, the material frame part and the leveling feeder head part. Today, lihao mechanical technicians continue to lead you to understand the work flow of the other main structure of the three-in-one feeder (namely, the leveling feeder head part).
Triad leveling feeder head when using, first through the pivotal feed width adjustment screw of components of the distance between two sliding seat, to adjust to the limit of the channel width and for leveling process match the width of the coil, and then by leveling feeder feeding mechanism of the second linear actuator driven feed roller move in a direction away from the feed roller, and then, by triad feeder material partly open-book strip along the feed direction of the channel into and progressive through the limit and the inlet end up in leveling device of leveling area,Again on the second linear actuator driven by feed roller moving in the direction of the feed roller under near, turn drives drive on the feed roller and through the interaction of feed roller rotation to strip into leveling area, and leveling device under the leveling wheel rotation, inspired by rotating drive the leveling of group and cooperate with each other on leveling wheel to leveling strip processing.
At this time by leveling feeder head first eccentric shaft of eccentric shaft adjustment device adjusting mechanism and second eccentric shaft adjustment mechanism on leveling down the wheel and the distance between the leveling wheelset leveling precision, required by the first eccentric shaft through the pivot adjusting mechanism of regulating handwheel driving first eccentric shaft rotation, coupled with the first connection kit, second eccentric shaft and a linear actuator joint actuation to drive the first installation of the relative frame of pivotal, thereby giving impetus to the movement of the leveling wheel, thus precision adjustment on leveling wheel and the distance between the leveling wheel.
